Dover Wilden Original A8 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 39

Dover Wilden Original A8 Скачать руководство пользователя страница 10

8

WILDEN PUMP & ENGINEERING, LLC

WIL-10270-E-02

Height .................................. 668 mm (26.3")
Width ................................... 404 mm (15.9")
Depth .................................. 343 mm (13.5")
Est. Ship Weight ..........Aluminum 32 kg (70 lbs)

Cast Iron 51 kg (112 lbs)

316 Stainless Steel 47 kg (104 lbs)

Alloy C 52 kg (114 lbs)

Air Inlet ....................................19 mm (3/4")
Inlet ............................................ 51 mm (2")
Outlet ......................................... 51 mm (2")
Suction Lift ........................... 6.1 m Dry (20')

8.53 m Wet (28')

Displacement/Stroke ....... 2.08 l (0.55 gal.)

1

Max. Flow Rate ............... 420 lpm (111 gpm)
Max. Size Solids .....................6.4 mm (1/4")

1

Displacement per stroke was calculated at 4.8 bar

(70 psig) air inlet pressure against a 2 bar (30 psig)
head pressure.

Example:

To pump 197 lpm (52 gpm) against

a discharge pressure head of 2.7 bar (40 psig)
requires 5.5 bar (80 psig), 68 Nm

3

/h (40 scfm)

air consumption, and a pump speed of 108
strokes/minute. (See dot on chart.)

Caution: Do not exceed 8.6 bar (125 psig) air
supply pressure.

Flow curves are for “optimal speed” conditions only. The “optimal speed” is that speed which
provides the maximum flow under a particular air and fluid pressure condition. The optimal speed
varies for different fluid and air pressures. Recommendations for optimal speed can be found on
the right side of the flow curve.

Flow rates indicated on chart were determined by pumping water.

For optimum life and performance, pumps should be specified so that daily operation parameters
will fall in the center of the pump performance curve.

[LPM]

Water Discharge Flow Rates

[LPM]

Water Discharge Flow Rate

This curve demonstrates the flow
created when the stroke rate is modi-
fied under a static air and fluid pres-
sure condition. This curve can be
applied to different pressure conditions
to estimate the change in flow due to
stroke rate.

SECTION 5E

PERFORMANCE CURVES

A8 METAL ACCU-FLO™ RUBBER/TPE-FITTED

SECTION 5F

70/30 OPERATING CONDITION

A8 METAL ACCU-FLO™ RUBBER/TPE-FITTED

«
...
8
9
10
11
12
...
»

Содержание Wilden Original A8








































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды