Dover Unified Brands Randell PH120F Скачать руководство пользователя страница 7

 

unifiedbrands.net          

with  proof  of  starting  date,  up  to  a  maximum  of  six  months  from  date  of 
purchase.   
 
Temperature adjustments are not covered under warranty, due to the wide 
range of ambient conditions. 
 
To  inquire  if  the  equipment  is  within  warranty,  call  our  Field  Service 
Department at: 1-88-994-7636. 
  
WHEN OPTIONAL 5 YEAR COMPRESSOR WARRANTY APPLIES 

1.  Provide  reimbursement  to  an  ASA  for  the  cost  of  locally  obtained 

replacement  compressor  in  exchange  for  the  return  of  the  defective 
compressor sent back freight prepaid.  Note: Unified Brands does limit 
amount  of  reimbursement  allowed  and  does  require  bill  from  local 
supply  house  where  compressor  was  obtained  (customer  should  not 
pay servicing agent up front for compressor). 

2.  Provide  repair  at  the  manufacturing  facility  by  requiring  that  the 

defective unit be sent back to Unified Brands freight prepaid.  Perform 
repair at the expense of Unified Brands and ship the item back to the 
customer freight collect. 

3.  Furnish  complete  condensing  unit  freight  collect  in  exchange  for  the 

return  of  the  defective  compressor  sent  back  freight  prepaid.  
(Decisions on whether or not to send complete condensing units will be 
made by Randell’s in-house service technician). 

 
WHEN OPTIONAL LABOR EXTENSION POLICY APPLIES 
Unified Brands will provide reimbursement of labor invoiced to an ASA for any 
customer  that  has  an  optional  labor  extension  of  our  standard  warranty.  
(Contracted  rates  do  apply)  Unified  Brands  offers  both  1  and  2  year 
extensions.    Labor  extensions  begin  at the  end of  our  standard  warranty  and 
extend out 9 months to 1 calendar year or 21 months to 2 calendar years from 
date  of  purchase.    Please  contact  Randell  technical  service  hotline  at  1-888-
994-7636 for details and any question on Authorized Service Agents (ASA)
 
NOTE:  Pizza  Hut  receives  a  standard  2  year  labor  warranty  and  5  year 
compressor  warranty  as  standard  for  the  models  listed  within  this 
manual. Export units do not qualify for this warranty. 
 
WHEN EXPORT WARRANTIES APPLY 

1.  Unified  Brands  covers  all  non-electrical  components  under  the  same 

guidelines as our standard domestic policy. 

2.  All  electrical  components  operated  on  60  cycle  power  are  covered 

under our standard domestic policy. 

3.  All  electrical  components  operated  on  50  cycle  power  are  covered  for 

90 days from shipment only. 

4.  Extended warranty options are not available from the factory. 
 

ITEMS NOT COVERED UNDER WARRANTY 

1.  Maintenance type of repairs such as condenser cleaning, temperature 

adjustments, clogged drains and unit leveling. 

2.  Unified Brands does not cover gaskets under warranty.  Gaskets are a 

maintenance  type  component  that  are  subject  to  daily  wear  and  tear 
and  are the  responsibility  of the  owner  of the  equipment.    Because of 

Содержание Unified Brands Randell PH120F




























Отзывы: