WIL-10183-E-03
Wilden
®
16
Disassembly / Reassembly
Step 4
Remove the discharge valve balls and
seats from the liquid chambers and inspect
for nicks, chemical attack or abrasive
wear. Replace worn parts with genuine
Wilden parts for reliable performance.
Step 5
Using a 1/2" wrench, remove the two
(2) large clamp bands which fasten the
intake manifold to the liquid chambers.
Step 6
Lift liquid chambers and center section from
intake manifold to expose intake valve balls
and seats. Inspect ball cage area of liquid
chamber for excessive wear or damage.
Step 7
Remove one (1) set of large clamp bands
which secure one (1) liquid chamber to the
center section.
Step 8
Lift liquid chamber away from center section
to expose diaphragm and outer piston.
Step 9A
Using an adjustable wrench, or by rotating
the diaphragm by hand, remove the
diaphragm assembly.
NOTE:
Due to varying torque values,
one of the following two situations may
occur: 1) The outer piston, diaphragm
and inner piston remain attached to the
shaft and the entire assembly can be
removed from the center section.
