Dover Markem-Imaje 1050, Руководство пользователя, Страница: 47 / 64

43
10 Printer Configuration
Press
►
10.1 Print Head Properties
The grid shows the heads and pens available in the current configuration. These
are determined by what licenses are available for this printer, not what pens are
physically connected to the printer. Sections of the job are assigned to the pens in the
order in which they appear on this screen. For example, if a layout 1 inch high is created,
Pen 1 and Pen 2 from Head 1 above would be used to print it. Any other heads or pens
would not be used. The order of the pens listed above cannot be changed. However, if
multiple heads are listed, their order can be changed in the Advanced Properties screen.
10.1.1 Distance from Sensor
The “Distance from Sensor” column determines how long the print pen will wait
before firing that pen. The sensor is the object detection sensor that is typically placed
before the print head. Alternatively, this is the distance that the pen will wait before
printing from the internally generated edge signal.
The “Fine Adj” adjusts the distance of the pen from the sensor by individual pixels.
This number can either be positive (moves the pen away from the sensor) or negative
(towards the sensor). This is useful when stitching one or more pens.
10.1.2 Print Direction
The direction of printing determines the order of firing of the printer nozzles. If this
is set incorrectly, the images will appear “ghosted” or double printed and backwards
when printed. The direction is determined by looking at the back of the head where the
cable connections enter the print head.
For
information