Dover Markem-Imaje 1050 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 64

Dover Markem-Imaje 1050 Скачать руководство пользователя страница 20

16

4.4.3 Shift Codes

Shift codes are created by selecting Layout->Shift Codes.

The figure above shows the Shift Codes dialog box. A Shift code called Group A

Shift was created by selecting the New button. Initially, the Shift Code column is blank.
The shifts called A, B, and C were added. The start times for each were also selected.
The Shift Code text for this shift code is printed when the time is greater than or equal to
the Start Hour and Start Minute and less than the Start Hour and Start Minute of the next
shift code. The clock used to compare to these times is selected at the top. In this case,
the default clock was selected so the current time on the computer will be used to
determine the shift code that is printed. After editing the values for a shift code the Apply
button must be selected to save any changes before selecting another shift code.

For

information

«
...
18
19
20
21
22
...
»

Содержание Markem-Imaje 1050

































































Отзывы:

Нет отзывов