manualshive.com logo in svg

Dover Hillphoenix DI-H, Руководство по установке и эксплуатации

Продукт Dover Hillphoenix DI-H - это инновационный холодильник, предназначенный для профессионального использования. У нас вы можете бесплатно скачать Руководство по установке и эксплуатации, чтобы максимально эффективно использовать этот продукт. Загрузите его с manualshive.com.

Поделиться
Скачать
background image

LOOR PREP

1. 

Ask the general contractor if your current copy of the build-
ing dimensions are the most recently issued. Also, ask for 
the points of reference from which you should take dimen-
sions to locate the cases.

2. 

Using chalk lines or a laser transit, mar

k the fl oor where 

the cases are to be located for the entire lineup. The lines 
should coincide with the outside edges of the case feet.

3. 

Move case as close as possible to its permanent location.  
Remove all crating and shipping braces above the ship-
ping pallet. Loosen the plastic dust cover from the pallet, 
but leave cover over the case to protect it while removing 
the case from the pallet. 

4. 

Shipping braces with a sled runner construction can either  
have metal brackets that can be removed with a screw 
gun, or wood blocks that can be removed with a J-bar. 

Note: Shipping braces are normally located at each 
corner of the case. (Shipping braces used vary and are 
based on case design for best transport.)

5. 

Carefully, if horizontal supports, lift case up and off the 
pallet. Remove dust cover. Installation hardware ships in 
a marked packet located inside the case.  Remove dust 
cover. Installation hardware ships in a marked packet 
located inside the case. 

6. 

To level, locate the highest point on the positioning lines 
as a reference for determining the proper height of the 
shim-pack levelers. A laser transit is recommended for 
precision and requires just one person. Level adjustable 
feet by twisting, if applicable, or shim as necessary under 
horizontal supports as this will help ensure that the case 
is not settling over time.

7. 

Locate horizontal support positions along the chalk line 
(Fig. 1). Spot properly leveled shim packs at each support 
location.

8. 

If necessary, drill a hole in each end of every horizontal 
support (Fig. 2) and fasten to the fl oor with concrete 
anchors. 

Note: The holes do not need to be in the exact 

locations specifi ed here. Be sure that the anchors are 

LOCATION

This hot display case has been designed for displaying and 
storing perishable food product. It is engineered for air-con-
ditioned stores with a maximum ambient of 75°F and 55% 
relative humidity.

When selecting the location for placement of this case, avoid 
the following conditions:

Excessive Air Movement

1. 

Doors

2. 

Air-conditioned vents

3. 

Other air sources

Fig. 1  Horizontal supports

SUPPORTS

     

C A U T I O N

Locate the horizontal supports under unit before 
removing from pallet. Failure to do so will dam-
age the fi nished metal if correct lift points are 
not identifi ed prior to removal.

▲

 

LINE-UP & INSTALLATION

Single Case

1. 

Move the case into position. Using a “J” bar, raise the end 
of the case (under cross support), and lower the horizontal 
support on to the shim packs. Repeat on the other end of 
the case.

     

C A U T I O N

These cases are not designed for excessive 
external weight. Do not walk on top or inside 
of cases. Doing so may result in case damage 
and/or personal injury.

▲

 

     

W A R N I N G

Be  certain  that  your  hands  and  feet  are  out  of 
the  way  before  lowering  the  case.  Failure  to  do 
so may result in serious injury.

▲

 

Fig. 2  Seismic anchoring locations

close to the end of the horizontal supports and at each 
corner of the case.

CASE INSTALLATION

12

Содержание Hillphoenix DI-H

































Отзывы:

Нет отзывов

Похожие инструкции для Hillphoenix DI-H

Kysor/Warren GranBering KW Technical Manual & User Instructions preview
GranBering KW
Бренд: Kysor/Warren Страницы: 53
VALERA PLENUS FG 128 Datasheet preview
PLENUS FG 128
Бренд: VALERA Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды