STOP
34
Caution!
-
Press the stop button (
fi
g. 76 d) if the
bucket is in danger of over
fl
owing!
- Empty the bucket.
-
Press the stop button again to
continue the descaling program.
●
With the model with a removable water
tank:
-
When the “FILL TANK” symbol (
fi
g. 84)
shows in the display for the
fi
rst time,
fl
ush the water tank thoroughly with warm
water to remove all the descaling residue.
-
Fill the tank with clean water.
-
Thereafter,
fi
ll the tank whenever the
“FILL TANK” symbol shows in the display.
26. When the descaling program has
completed, the display shows: “DRAIN”.
27. Empty the bucket.
28. Remove the cap from the drain hose and
allow the water to
fl
ow into the bucket
(
fi
g. 79).
29. Re
fi
t the cap on the drain hose when no
more water comes out of the hose (approx.
2.5 l).
30. Push the drain hose back into the rear wall.
31. Press the enter button (
fi
g. 78 d).
The display shows:
“REPLACE PACK” +
.
32. Place the ingredient packs back in the
cooling compartment, the display shows a
cup.
33. Press the enter button again (
fi
g. 78 d).
The display
fi
rst shows:
“PLEASE WAIT” and after that
.
34. The boiler will be
fi
lled with water. If the
water reaches the right temperature the
thermometer will disappear from the display
and will show “SELECT DRINK”.
35. Place a pot under the outlet (
fi
g. 82).
36. Check the operation of the dispenser by
pressing a selection button once and the
hot water button once (
fi
g. 83).
The dispenser is now ready for use again.
Fig. 82 Place a pot under the outlet
Fig. 83 Check the operation
Fig. 84 Water tank empty,
fi
ll the tank
SELECT DRINK
FILL TANK
34
Cafitesse_C60_EN.indd 34
Cafitesse_C60_EN.indd 34
18-12-2007 16:53:26
18-12-2007 16:53:26