Douglas Dynamics Mid-Duty IMPACT, Руководство по установке

Страница: 8 / 12

Lit. No. 87015, Rev. 00 8 May 15, 2021
2. On driver's side, pull up on headgear to relieve
pressure on connecting pins while pulling driver's
side connecting pin out. Rotate pin toward mount;
insert it into connecting pin hole.
3. Verify that connecting pin is engaged in mount
(through outside and inside plates) and extends
approximately 1/8" through the plate.
4. Repeat on passenger's side.
MOUNTING SNOWPLOW TO VEHICLE
ATTACHING THE SNOWPLOW
NOTE: Use dielectric grease to prevent corrosion
on all connections.
NOTE: Use lubricant on connecting pins to ensure
ease of attach/detach.
1. Slowly drive vehicle forward to engage rear
headgear arms into receiver slots, bottoming out
headgear arms in slots.
WARNING
Inspect snowplow components and fasteners
for wear or damage whenever attaching or
detaching the snowplow. Worn or damaged
components could allow the snowplow to
drop unexpectedly.
Connecting Pin
Jack Stand
Wire-Lock
Clevis Pin
Jack
Stand
Hole in Headgear
Headgear
Connecting
Pin Hole
WARNING
Keep 8' clear of the blade when it is being
raised or lowered. Do not stand between
vehicle and blade or directly in front of the
blade. If the blade hits or drops on you, you
could be seriously injured.
WARNING
Keep fi ngers away from snowplow and UTV
attachment points.
Receiver
Headgear
Jack
Stand
Connecting
Pin
Headgear
Arm
Connecting Pin
Hole
Cable-Restraining
Wire-Lock Clevis Pin
Winch
Cable/Rope