background image

Lit. No. 87015, Rev. 00 

May 15, 2021

SAFETY

SAFETY PRECAUTIONS

Follow all safety and operating instructions in 
your UTV owner's manual.

Improper installation and operation could cause 
personal injury, and/or equipment and property damage. 
Read and understand labels and this Owner's Manual 
before installing, operating, or making adjustments.

 WARNING

Lower the blade when the vehicle is parked. 
Winch rope could fail, causing the blade to 
drop unexpectedly. Failure to do this could 
result in serious personal injury.

 WARNING

Remove blade assembly before placing 
vehicle on hoist.

 WARNING

The driver shall keep bystanders clear of the 
blade when it is being raised or lowered. Do 
not stand between the vehicle and the blade 
or within 8 feet of a moving blade. A moving 
or falling blade could cause personal injury.

 WARNING

Vehicle mount reduces ground clearance. Use 
additional caution when driving vehicle with 
mount installed. Remove vehicle mount to 
restore original vehicle ground clearance at 
the end of the plowing season.

 WARNING

To prevent accidental movement of the blade, 
always unplug the winch control whenever 
the snowplow is not in use. 

 WARNING

Keep hands and feet clear of the blade and 
sway frame when mounting or removing the 
snowplow. Moving or falling assemblies could 
cause personal injury.

 WARNING

Do not exceed GVWR, GAWR, or 

maximum vehicle load capacity, 
including the blade and ballast.

PERSONAL SAFETY

•  Remove the ignition key and put the vehicle in 

PARK and set the brake to prevent others from 
starting the vehicle during installation or service.

•  Wear only snug-

fi

 tting clothing while working on 

your vehicle or snowplow.

•  Do not wear jewelry or a necktie, and secure

long hair.

•  Wear safety goggles to protect your eyes from 

battery acid, gasoline, dirt, and dust.

•  Wear hearing protection such as earmu

 s or 

earplugs as appropriate or required.

•  Avoid touching hot surfaces such as the engine, 

radiator, hoses, and exhaust pipes.

•  Always have a 

fi

 re extinguisher rated BC handy for 

fl

 ammable liquids and electrical 

fi

 res.

Содержание Mid-Duty IMPACT













Отзывы: