Douglas Dynamics Blizzard 7600HD, Руководство пользователя

Страница: 29 / 40

Lit. No. 40694, Rev. 04 29 May 1, 2021
9. While holding power switch RIGHT, push DOWN
and hold Arm/Blade Operation switch to fully lower
arm.
10. Unplug electrical harnesses.
NOTE: After each use of the snowplow, reapply
dielectric grease to the electrical plugs to
maintain the protective coating on the terminals.
NOTE: Place electrical plugs in storage position.
The plugs are equipped with plug covers.
CAUTION
On 2-Plug electrical systems, plug covers
shall be used whenever snowplow is
disconnected. Vehicle battery cable is 12V
unfused source.
REMOVING SNOWPLOW FROM VEHICLE & STORAGE