background image

Lit. No. 77341, Rev. 01 

April 1, 2020

33230

 WARNING

To prevent accidental movement of the blade, 
always turn the control OFF whenever the 
snowplow is not in use. The power indicator 
light will turn OFF.

 CAUTION

Refer to the online selection system for 
minimum vehicle recommendations and 
ballast requirements.

 WARNING

Lower the blade when vehicle is parked. 
Temperature changes could change 
hydraulic pressure, causing the blade to 
drop unexpectedly or damaging hydraulic 
components. Failure to do this could result in 
serious personal injury.

 WARNING

Remove blade assembly before placing 
vehicle on hoist.

 WARNING

The driver shall keep bystanders clear of the 
blade when it is being raised, lowered, or
angled. Do not stand between vehicle and blade 
or within 8 feet of a moving blade. A moving 
or falling blade could cause personal injury.

 WARNING

Keep hands and feet clear of the blade and 
A-frame when mounting or removing the 
snowplow. Moving or falling assemblies could 
cause personal injury.

SAFETY PRECAUTIONS

Improper installation and operation could cause 
personal injury and/or equipment and property damage. 
Read and understand labels and the Owner's Manual 
before installing, operating, or making adjustments.

PERSONAL SAFETY

•  Remove the ignition key and set the vehicle 

parking brake to prevent others from starting the 
vehicle during installation or service.

•  Wear only snug-

fi

 tting clothing while working on 

your vehicle or snowplow.

•  Do not wear jewelry or a necktie, and secure 

long hair.

•  Wear safety goggles to protect your eyes from 

battery acid, gasoline, dirt, and dust.

•  Avoid touching hot surfaces such as the engine, 

radiator, hoses, and exhaust pipes.

•  Always have a 

fi

 re extinguisher rated BC handy, 

for 

fl

 ammable liquids and electrical 

fi

 res.

FIRE AND EXPLOSION

Be careful when using gasoline. Do not use gasoline 
to clean parts. Store only in approved containers away 
from sources of heat or 

fl

 ame.

CELL PHONES

A driver's 

fi

 rst responsibility is the safe operation of 

the vehicle. The most important thing you can do 
to prevent a crash is to avoid distractions and pay 
attention to the road. Wait until it is safe to operate 
Mobile Communication Equipment such as cell phones, 
text messaging devices, pagers, or two-way radios.

VENTILATION

 WARNING

Gasoline is highly 

fl

 ammable and gasoline 

vapor is explosive. Never smoke while 
working on vehicle. Keep all open 

fl

 ames 

away from gasoline tank and lines. Wipe up 
any spilled gasoline immediately.

 WARNING

Vehicle exhaust contains lethal fumes. 
Breathing these fumes, even in low 
concentrations, can cause death. Never 
operate a vehicle in an enclosed area without 
venting exhaust to the outside.

Содержание 33230











Отзывы: