Page 6
Step 7: Assemble the ladder
For this step, please prepare two ladder frames(No.12),
Step 8: Fix the trampoline
Please place the trampoline on a flat ground.
Insert the wind stakes(No.27) on both ends of each foot pipe
to fix trampoline.
Attention:
Please place the trampoline on a flat ground to use, otherwise, it will shorten the life of the trampoline.
After assembly, please do not drag the trampoline. If you must move it, please re-adjust the trampoline
after moving. You can only use it again after you confirming that all of the legs of the trampoline are
perpendicular to the ground. Otherwise, the trampoline will tilt or even collapse.
three step pipes(No.13), twelve M6 washers(No.17), six M6
lock nuts(No.18), six M6*35mm bolts(No.19) and two
wrenches(No.20)(No.22).
Attach three step pipes to two frame pipes. And the screw
six M6*35mm bolts, twelve M6 washers and six M6 lock
nut by using two wrenches.
Finally hook the ladder to the frame.
12
18
17
19
13
27
17
