DOTWORKZ COOLDOME 12 VDC, Руководство по установке

Страница: 4 / 16

2
Foam Conduit Feed Plugs for ½” I.D. (PG-13) Conduit
Prevents Humid Air exchange from venting thru electrical conduit into Dotworkz sealed enclosures,
Thus eliminating condensation issues within Dotworkz sealed enclosures.
QUICK INSTALLATION GUIDE
VENT STOPPER PLUGS for Conduit
1) Pull wires to final installed length.
2) Open Vent Stop Plug and install over wire.
3) Pinch Plug to compress over wire, and insert into
conduit feed mouth.
4) Push plug into conduit mouth with finger
tips till it flush with outside of fitting
5) Repeat steps 1-4 for any other conduit
feeds as needed.
6) To assure an airtight seal, caulk around wires
and cables, coating entire plug surface with sealant.