dot-spot information for the user
LED illuminants are great energy-savers and have an exceptionally long life assuming
normal use. For this reason replacing of the illuminant is not envisaged. In order to ensu-
re the maximum lifespan of the LED the following points should be observed:
1.
Heat dissipation from the LED should not be impeded. Do not cover the spotlight.
2.
Avoid use of the spotlight in direct sunlight.
3.
In case of automated operations, use a time switch and a photoelectric switch to
control the spotlights.
4.
Clean the spotlight from time to time with a damp cloth.
Malfunctions
Disposal
When the spot reaches the end of its service life, dispose of the spot and all accessories
responsibly in line with environmental protection rules. You must not dispose of electro-
nic waste as normal household waste.
dot-spot information for the user / malfunctions / disposal
GB
Warranty conditions
18
19
GB
Warranty conditions in Germany
These warranty conditions have been in force since 01.01.2006 / technical modifications reserved, errors excepted.
These warranty conditions apply to purchasing and deployment of our products in the
Federal Republic of Germany. In all other countries, the agreed terms of sale and deli-
very and/or legal warranty requirements of the country in question apply. This warranty
does not affect your legal rights. This warranty statement is a voluntary service by us as
the manufacturer.
All dot-spot products are tested for 100 % performance before they leave our factory.
However, we cannot completely eliminate individual errors during operation.
In the scope of legal requirements, we grant a warranty of two years of date of purchase
(invoice date). This warranty covers correct working of the dot-spot recessed spot and
accessories in case of proper use.
The warranty does not cover damage caused by normal wear and tear and or mechani-
cal wear due to application of external force.
The warranty includes replacement of defective parts. You are not entitled to claim
for consequential damage. In particular, you are not entitled to compensation for
consequential damage caused by improper use, or improper installation of the products.
Professional installation is described in the assembly instructions.
dot-spot recessed spots are designed for operation with special dot-spot power supply
units. No warranty claims will be accepted for cases of damage caused by operation with
unsuitable control gear, power supplies or other power sources.
dot-spot GmbH & Co. KG
Development – Production – Sales
Industriestraße 1
90592 Schwarzenbruck / Germany
Telephone +49 (0) 9128 / 72 22 17 - 0
Telefax
+49 (0) 9128 / 72 22 17 - 9
Internet
www.dot-spot.de
Failure
Cause
Workaround
Spot not lit
Cable break in cable to
transformer
Check the cable; replace if
necessary
Power supply to transformer
interrupted
Check input voltage at trans-
former
Transformer defective
Replace transformer
Spot switches off
after a short time;
the power supply unit
becomes very hot
Power supply unit is overload Use a power supply unit with
a higher rating
