Plug connection
Connection with 12 V low-voltage plug system
Connection of the Mini LED garden spot (single set)
1.
Place the Mini LED garden spot on the appropiate area.
2.
Lay the power line in direction of the socket-outlet, the consistable special cable
can be directly layed in the ground.
3.
Connect cable of spot with power supply and save connection with union nut.
Put safety plug into power socket - Ready.
1. Assembly with steel peg
The stainless steel spike which is fixed to the housing is suitable for mounting on
loose surfaces e.g. earth, sand and others. Attach the mounting bracket on the
spike first. Use therefore the screw which is included with the spike. Check the
firmness of the ground and push the spike into the ground. If necessary, put a
piece of wood an it and tap it lightly with a hammer. If necessary the spot has to
be removed from the assembly bracket.
2. Assembly with mounting bracket (enclosed)
Please remove first the steel peg and the spot from the assembly bracket, by
declamping the screws. Mark the position of the hole for the assembly bracket on
the surface. Drill a hole in the ground and equip it with a suitable plug. The inclu-
ded plug is suitable for mounting on substrates made of concrete, stone and
masonry. For wood surfaces, the mounting angle can be mounted directly with an
appropriate screw with using the plug. In the case of hardwood it may be useful
drilling a hole before mounting. Place the mounting bracket right over the plug,
align in the desired direction and tighten it up with an appropriate screw. Now the
Mini LED garden spot can be attached to the mounting bracket. Plug an appropri-
ate screw through the hole of the mounting bracket and fix it laterally with a hexa-
gon-wrench into the threaded hole on the light housing. Adjust the spotlight before
tightening into the desired direction.
3. Using the extension adapter and installation extensions (optional)
Instead of the mounting bracket you can also use the extension adapter and
installation extensions to fix the Mini LED garden spot. This is especially recom-
mended if you want to mount the spot in an elevated position. The extension
adapter may be implemented using appropriate wall plugs with M6 internal thread
to be mounted on various substrates.
Assembly
GB
Plug connection / connection of the spot
14
15
GB
Mini LED spot 12 V / 3 W
230 V 50 Hz
12 V
5 m
5 m
5 m
5 m
power supply
3-way
cable
distributor
Mini LED spot 12 V / 3 W
230 V 50 Hz
power supply
12 V
5 m
