Dostmann Electronic TC 309, Инструкция по эксплуатации

Страница: 23 / 28

DATA LOGGER SOUND LEVEL METER
22
MAX The Maxiumum value is now being displayed.
MIN The Minimum value is now being displayed.
This indicates auto power off is enabled.
This indicates that the display data is being held.
This Battery is not sufficient for proper operation.
T1, T2, T3, T4
t indicates the value below is T1, T2, T3, T4
Temperature sensor
T indicates the value below is T1-T2 sensor.
r
REL The reading is no wunder relative mode.
REC This indicates that the tester is recording. If it blinks, it
indicates the memory is full.
(3) ON/OFF & Backlight button
(4) Hold button
(5) Record button
(6) T1-T2-button
(7) MAX/MIN function control button
(8) °C, °F control button
(9) Offset calibration screw
(10) Digital output connector
(11) AC power adapter connector
(12) Tripod connector
(13) Battery cabinet cover
IX. Setup TestLink SE-309-USB interface
software:
Ÿ
The TestLink package contains:
1.) 80mm CD
2.) Custom designed USB cable for TestLink
Ÿ
System Required:
Windows 95 or Windows 98 or Windows NT 4.0 above.