Operation (cont’d)
16
5. Refueling
1.
Before removing gas cap, turn engine off and allow to cool for at least 2 minutes.
Note:
A running or hot engine can ignite fuel.
2.
Remove grinder gasoline cap.
3.
Add gasoline through the fill opening:
Use only an UL-approved portable gasoline container to transfer the gasoline to the
grinder’s tank.
Be aware of safety warning and instructions below for avoiding static electric caused
fires.
WARNING: Static Electric Spark Hazard
A static electric spark can explosively ignite gasoline vapor, resulting in a flash fire that
could cause serious injury or death. See “Special Safety Information on Static Electricity”
at end of this manual.
4.
Clean up gasoline spills/splashes immediately.
If possible, move the grinder
away from spilled gasoline on the ground.
Wipe up spilled gasoline, and wait 5 minutes for excess gasoline to evaporate before
starting engine.
Gasoline soaked rags are flammable and should be disposed of properly.
If gasoline is spilled on your skin or clothes, change clothes and wash skin immediately.
5.
Replace gasoline cap securely before starting engine.
6.
Store extra gasoline in a cool, dry place in an UL-approved, tightly sealed container.
7.
Filling towable units or portable containers at service stations:
Avoid static electric sparking while filling the gasoline tank:
Never fill the grinder’s gas tank directly from the fuel pump. The grinder’s tank is
not grounded and high velocity flow from the pump
can cause static electricity build-up. Use an approved
portable container to transfer gas to the grinder’s tank.
Use a portable container made of metal or conductive
plastic. This is preferred because it dissipates static
charge to ground more readily.
Never fill a portable gas container while it is sitting
inside a vehicle, trailer, trunk or pick-up truck bed.
ALWAYS place container on the ground to be filled.
Keep nozzle in contact with container while filling.
Do not use a nozzle lock-open device.
Содержание 2961010CE
Страница 2: ...Hazard Signal Word Definitions 2...
Страница 32: ...Wiring Diagram 337 13HC CE 357 13HE CE 620 20HE CE 32...
Страница 33: ...Wiring Diagram 620 25KE CE 33...
Страница 34: ...34 This page is intentionally left blank...