CAUTION!
Risk of injury due to spring tension
The end cap of the spray gun is under
spring tension. If you remove the end
cap, the spring tension could cause the
end cap to jump out unexpectedly and
cause light injuries.
– Removing and installing end cap
NOTICE!
Material damage due to unsuitable
cleaning agent
Unsuitable cleaning agents can damage
the product.
– Only use suitable cleaning agents
approved by the material manufac-
turer.
– Observe the safety data sheets.
– Place heavily soiled components
into a cleaning bath.
– For cleaning baths, use only elec-
trically non-conductive con-
tainers.
– Do not use ultrasound baths.
Use alcohols (isopropanol, butanol) for
water-based paint.
Remove dried water-based paint residue
using a manufacturer approved thinner.
When cleaning with solvent, do not spray
into a closed container. An explosive gas-
air mixture can form inside closed con-
tainers.
NOTICE!
Damage due to unsuitable cleaning
tools
Unsuitable cleaning tools can damage
the product.
– Only use cloths, soft brushes and
paintbrushes.
– Do not use abrasive cleaning tools.
– Do not poke blocked nozzles with
metallic objects.
– Do not use compressed air for
cleaning.
– Do not use any thinner spray guns.
– Do not use high pressure for
cleaning agents.
7.2
Cleaning
Clean the spray gun.
Protective equipment:
Use ear protection
Eye protection
Respiratory protection device
Protective workwear
Protective gloves
2. If the soiling is heavy, dismantle the
nozzle seal seat and the nozzle and
Follow the instructions for the
spray jet screen..
3. Use a cleaning agent to carefully clean
the spray gun. Dry with a soft cloth.
Cleaning and maintenance
01/2017
EcoGun AL AUTO - MSG00012EN
12/40
