Doro Form 40, Руководство пользователя

Страница: 14 / 28

English
Australia and New Zealand
Products permitted for connection to the telephone
network are marked with
in Australia and
in New Zealand. These marks
indicate the products comply with the regulations
and can be legally connected in the country of
purchase.
Customer support
AUSTRALIA
DORO Australia Pty Ltd
PO Box 6646
Silverwater BC NSW
Australia
Consumer Support
Ph: 300 5 023
Fax: (02) 94 692
support@doro.com.au
www.doro.com.au
NEW ZEALAND
Atlas Gentech (NZ) Limited
Private Bag 492
Panmure, Auckland
New Zealand
Consumer Support
Ph: 0900-500-25 (Toll Call)
Fax: (09) 54-222
support@atlasgentech.co.nz
Electro Magnetic Radiation (EMR)
This telephone complies with applicable safety
requirements for exposure to radio waves. The
mean power of this telephone is not greater than
4 mW.
This is below the 20mW limit at which testing is
required.
REN (RN for New Zealand)
The REN (Ringer Equivalence Number) or (RN) is
of significance only if you wish to connect more
than telephone to your telephone line. A standard
telephone line has a maximum REN capacity of 3
(RN of 5). It is possible to connect 3 devices with
a REN of (RN of ) with no degradation to the
product’s performance. Exceeding this limit may
cause the volume of the ringer in any phone to
decrease or not ring at all.
ALL PRODUCTS
The grant of a Telepermit for any item of termi-
nal equipment indicates only that Telecom has
accepted that the item complies with the mini-
mum conditions for connection to its network. It
indicates no endorsement of the product by
Telecom, nor does it provide any sort of warranty.
Above all, it provides no assurance that any item
will work correctly in all respects with another item
of Telepermitted equipment of a different make or
model, nor does it imply that any product is com-
patible with all of Telecom’s network services. This
equipment shall not be set to make automatic calls to
the Telecom ““ Emergency Service. This equip-
ment may not provide for the effective hand-over
of a call to another device connected to the same
line. This equipment should not be used under any
circumstances that may constitute a nuisance to
other Telecom Customers.
CND PRODUCTS
If a charge for local calls is unacceptable, the
“DIAL’’ button should NOT be used for local calls.
Only the digits of the local number should be
dialled from your telephone. DO NOT dial the area
code digit or the “0’’ prefix.