background image

English

30 

www.doro.com

30

30

The answering machine

Playback of messages

The 

5

/

indicator on the base unit will show the number of new messages in 

the memory, one fl ash for one message, two fl ashes for two messages etc.

1.

Press 

9

 to start playback. The voice will announce how many messages you 

9

9

have.

2.

After each message the day/time stamp will state the day and time the 

message was received.

3.

After playback you will hear “End of messages”. 

4.

To delete individual messages, press the 

C

 button after the message has 

played .

Please Note: It is recommended that old messages are deleted to avoid fi lling up the memory.

The following functions are available during playback:

Button

Function

8 8

Repeat/skip to previous

.

9 9

Skip to next message.

g

   

Stop playback.

 

To erase the current message, hold down until you hear a beep.

+/- 

 

Increase or decrease the volume.

9

 

  

9

9

Playback and pause during playback (max. 60 seconds). 

 

 

Press 

9

again to continue.

Erase all messages

Deletion of all messages is only possible after playback: 

Press and hold 

C

until you hear a short beep and an announcement.

Содержание COMFORT 1000









































Отзывы: