background image

 English

www.doro.com 

27

The answering machine

About the answering machine

The answering machine has to be turned on in order to receive messages. 

Incoming calls will be answered after the selected number of rings (see page 

29).

When the answering machine takes the incoming call, the caller will hear your 

outgoing message (OGM) followed by a short beep, at which time they can 

leave a message up to 3 minutes in length. The answering machine can record 

approximately 11 minutes of messages.

When the answer function is set to Answer Only mode, the caller will not be 

able to leave a message. The call will be disconnected once your announcement  

message has been played.

The answering machine functions can be accessed via the base unit controls or 

from a remote tone dialling telephone by calling your home or offi ce telephone 

number.  All answering machine voice prompts are in English.

Switching the answering machine On/Off

Press and hold 

!

 (on the base unit) to switch the answering machine on/off.  

With the answering machine On, the 

5

/

!

 indicator will light and the voice 

will confi rm the setting and state which OGM is active. All incoming calls will 

be answered after the selected number of rings.

When the answering machine is turned Off, the 

5

/

indicator will go out and 

the voice will confi rm the setting and no calls will be answered.

Содержание COMFORT 1000









































Отзывы: