English
4
www.doro.com
English
www.doro.com
5
Installation
Belt clip
A belt clip is fitted to the back of the handset, allowing the handset to be attached to a
belt, shirt pocket or similar.
Battery
The telephone is supplied with environmentally friendly nickel metal hydride (NiMH)
batteries – 2 x AAA 1.2V. As with all batteries, performance may degrade over time;
should you notice that the standby time has reduced considerably or there are signs of
leakage, the batteries should be replaced.
Fully-charged batteries will last for approx 100 hours in standby or 10 hours call time
(does not apply when hands free function is used). These operation times apply at
normal room temperature.
Full battery capacity will be achieved once the batteries have been charged 4-5 times,
completely discharged batteries will take about 10 hours to fully recharge.
Please note that the battery indicator in the display will flash while the handset is
located in the base unit and will not stop when the battery is fully charged.
The base unit has an automatic charging mechanism that prevents the batteries from
being overcharged or damaged by prolonged charging. It is better for handsets to be
recharged every other night, rather than after each call.
Please note!
To ensure and maintain good charging of the handset batteries we recommend that the base and handset
charge contacts are cleaned regularly, ie monthly, with a pencil eraser and/or a soft dry cloth. The
recharging system used in this model may result in the handset and the batteries warming up. This is
normal and will not harm the equipment.
When the telephone is installed for the first time, the batteries must be charged for 24 hours before using
the telephone. Use original batteries only. The guarantee does not cover any damage caused by incorrect
use of batteries. Please dispose of any batteries in a responsible and environmentally friendly manner.