Doro 5015, Руководство пользователя

Страница: 4 / 24

English
4 www.doro.com
Installation
Unpacking
The package should include the following items:
- Handset - Mains adapter
- Base unit - Line cord
- Battery - Belt clip
Connection
1. Connect the mains adapter to the
y
socket of the base unit and to an
electrical wall socket.
2. Remove the battery cover from the back of the handset. Insert the battery
plug and fit the battery into the handset. Replace the battery cover.
3. Place the handset in the base unit, with the keypad facing outwards . Once the
handset is correctly placed in the base unit, a beep will be heard and the
charge indicator
7
will illuminate on the base unit.
4. Charge the handset battery without interruption for 15 hours.
5. Connect the telephone line cord to the socket marked
t
on the base unit
and plug into the telephone network socket (using adapter plug if required).
IMPORTANT!
Under power failure conditions, this telephone will not operate. Please ensure that a separate
telephone, not dependent on local power, is available for emergency use. The earpiece of the
handset may attract small ferromagnetic objects such as staples and pins, care should be taken
when placing the handset near these items. Do not place the base unit in areas of high humidity
or where it will be exposed to direct sunlight or other major heat sources.
This model can only be recharged with the keypad set facing
outwards!