Doro 5015, Руководство пользователя

Страница: 15 / 24

English
www.doro.com 15
Expanded System
Multiple Handsets
The combination of multiple base units and multiple handsets provides for
many useful applications. Each can be used to answer an incoming call, be used
internally as an intercom system, and also to transfer external calls between
the handsets.
If you wish to use several handsets with one base unit, you should see to it that
the base unit is placed “in the middle”, so that the range will evenly divided
among the handsets.
Register a New Handset/Base unit
To enable the use of more than one handset or base unit a registration has
to be performed.
Every new handset must be registered in order to use a base unit. A maximum
number of 4 base units can be registered with each handset, and each base unit
can handle up to 5 handsets.
On registration the handset is allocated a handset number from 1-5.
Additional base units and handsets can be purchased from your local retailer.
1. Keep the base unit paging button
j
pressed for about 10 seconds until the
indicator
o
/
y
on the base unit starts flashing.
2. Press
P
5
.
3. Select a base number for the base unit you wish to register by pressing the
corresponding number button
1
-
4
. Wait for the signal.
4. Enter the base unit PIN code (0000 at default). Press
P
.
5. If the registration is successful the handset will return to standby mode
in a few seconds. The new handset number is shown on the right of the
display.