Doro 5015, Руководство пользователя

Страница: 5 / 24

English
www.doro.com 5
Installation
Belt Clips
A belt clip is included, which can be fitted on the back of the handset. To attach
the clip, press it into place over the back of the handset. On either side of the
handset, there are indents for the clips to clasp onto.
Battery
The telephone comes supplied with an environmentally friendly nickel metal
hydride (NiMH) battery. As with all batteries performance may degrade over
time, should you notice that the standby time has reduced considerably or there
are signs of leakage, the battery pack should be replaced.
A fully charged battery will last for approx. 100 hours in standby or approx. 10
hours call time. These operation times apply at normal room temperature.
A completely discharged battery will take about 15 hours to fully recharge.
Please note that the charge indicator
7
on the base unit is on while charging
and will go out when the battery is fully charged.
The battery charge indicator in the handset display will flash while charging and
will stop flashing when the battery is fully charged.
The equipment has an automatic charging mechanism that prevents the battery
from being overcharged or damaged due to prolonged charging.
Please note!
When the telephone is installed for the first time, the battery must be charged for 15 hours
before using the telephone.
Use DORO original batteries only. The guarantee does not cover any damages caused by
incorrect batteries.
The handset must be charged with the buttons facing outwards.
Please dispose of any batteries in an environmentally friendly manner.