English
•
Availability of accessories is subject to change depending on manufac-
turing availability. For more information about available accessories,
refer to the Doro website.
Insert SIM card and battery
IMPORTANT!
Turn off the phone and disconnect the charger before removing the
battery cover.
Be careful not to damage your fingernails when you remove the battery
cover. Do not bend or twist the battery cover excessively as it may get
damaged.
The SIM card holder is located inside the battery compartment.
1.
On the underside of the phone carefully remove the battery cover.
2.
Insert the mini SIM or USIM card provided by the mobile service pro-
vider. Make sure that the SIM card’s contacts are facing inwards and
that the cut off corner is as shown.
Note!
Take care not to scratch or bend the contacts on the cards
when inserting them into the card holders. This device only accepts
mini SIM card (2FF). Use of incompatible SIM cards may damage the
card or the device, and may corrupt data stored on the card.
3.
Connect the battery and place it in the compartment so there’s no
strain on the cables.
4.
Replace the battery cover.
5.
Attach the antenna by screwing it in place on the right side of the
phone.
6.
Connect the curly cord to the handset and to the socket on the left
side of the phone. Number 27 on the overview illustration.
Connect the power
CAUTION
Only use batteries, chargers and accessories that have been approved for
use with this particular model. Using unapproved accessories may be
dangerous and may invalidate the phone's type approval and warranty.
Connect the mains adapter to a wall socket and to the charging socket on
the right side of the phone. The power connection should always be kept
2