Dornoch UL-EV100, Техническое руководство

Страница: 16 / 33

Ultra Evac Technical Manual 11 2/8/2013
GD-99013 Rev. D
Unit Information and Error Messages
The cart display provides the operator feedback for common operating errors encountered during the evac
processing cycle. The most common messages are described below. Please call DMS at 1-888-466-6633 for
assistance with any error message.
Warning or Error Action Required
Leak Detected : This message indicates that there
has been a leak detected within the evac. The unit
alarms at the end of the cycle when cart has
completed the cleaning process.
Check all supply lines for correct connection. Call
service if necessary.
Replace Bleach: This message indicates that the unit
has run out of bleach. The unit alarms at the end of
the cycle and when replaced will go back and apply
bleach to the reservoirs as necessary.
Replace the bleach with a new gallon.
Replace Enzyme : This message indicates that the
Enzyme solution has run out. The unit alarms at the
end of the cycle when the reservoirs have completed
the cleaning process.
Replace the enzyme with a new gallon.
Valve Error: This message indicates one of the evac
valves is not operating properly. The error displays
after the reservoirs have completed the cleaning
process.
Contact service with the specific valve error.
Communication Error: This error indicates that the
cart and the evac are hooked together but there is no
data transfer between the two.
Uncouple the evac from the cart. Wipe the
contacts on the coupler and in the receiver with
alcohol and try to hook them together again. Call
service if the problem continues.
Periodic Maintenance
Interval Activity
Prior to each use Inspect the coupler hose for twisting or any leaks in the hoses. Inspect the coupler
housing for any cracks or other defects that may affect function. DO NOT use if the
equipment if damage is present.
As required Check the level of the enzyme and bleach in the bottles. Replace the bottles as
required.