INSTALL/REMOVAL INSTRUCTIONS: WINDOW REGULATOR
741-644
Disclaimer:
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a qualifi ed auto technician
before attempting to perform any work you are not qualifi ed to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage
or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Traffi
c Safety
Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
ATTENTION:
Refer to the appropriate shop manual for your vehicle to obtain specifi c service procedures for this part. If you do not have
a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualifi ed technician. Pay special
attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
2
©2011 Dorman Products, Inc.
No reproductions in whole or in part without prior written approval.
Removal Instructions
STEP 1:
Gain access to the window regulator assembly by removing the interior trim
panel.
STEP 1a:
Gently pry around plastic mirror trim piece and remove.
STEP 1b:
Gently pry around handle bezel and remove bezel.
STEP 1c:
Gently pry around switch and remove switch.
STEP 1d:
Disconnect electrical connections to switch.
STEP 1e:
Gently pry around door lock bezel and unsnap it from door panel. Unclip from
door lock rod and remove.
STEP 1f:
Using a 7mm socket, remove the 3
highlighted screws.
STEP 1g:
Lift trim panel up and remove from door.