Dormakaba BEST Wi-Q WQXM-PG, Руководство по установке и эксплуатации

Страница: 49 / 51

3 HARDWARE INSTALLATION
WQXM-PG Wi-Q™ Gateway Setup and User Guide | 49
Portal Signal Strength
The Portal RSSI value indicates how well the portal receives signal
from the door controller and should be -75dB or better. The Survey
Mode charts in the WQXM-PG denotes the lowest limit by the blue
dashed line in the Signal Strength chart. If the Portal RSSI value
is below the limit, please reposition the Gateway or the antennas
to improve signal strength. It may also be possible that another
portal is required for adequate coverage.
3.2.8.2 Verify Signal Strength and Packet Ratio Using
Survey Mode
Prior to installation, the Wi-Q Technology Site Survey feature in
the WQXM-PG should have been used to verify basic controller
signal strength. Once the controllers are signed on, the WQXM-PG
Site Survey webpage can be used to verify the signal strength and
packet ratio to verify all information is being sent successfully to
and from the Wi-Q Controllers.
To do this, please do the following:
1. Log in to the WQXM-PG by navigating to the IPv4 address
using an Internet browser.
2. Click on the ‘Survey Mode’ button.
3. Check the boxes next to the reader(s) connected to the
Gateway to select them for the survey.
4. Click on the ‘Start Survey’ button to begin surveying the
locks.
The WQXM-PG Gateway will begin logging the portal packet ratio,
the reader packet ratio as well as the signal strength at the portal
and the reader.