Dormakaba BEST Wi-Q WQXM-PG, Руководство по установке и эксплуатации

Страница: 33 / 51

3 HARDWARE INSTALLATION
WQXM-PG Wi-Q™ Gateway Setup and User Guide | 33
if nothing has been connected to WQXM-PG wireless network for
30 minutes, the internal Wi-Fi network will automatically disable.
3.2.5.5.1.1 DHCP
A static IP address of 192.168.1.200 is the default IP of the
WQXM-PG for first time configuration via the LAN port, howev-
er, the Gateway has built in DHCP functionality allowing network
administrators to assign portal IP’s dynamically via DHCP. To take
advantage of this feature, verify the DHCP checkbox is selected
instead of manually assigning an IP address. Provide the custom-
er’s local network administrator with the list of MAC addresses and
other information as required by the customer.
To complete enabling the DHCP setting, click on the ‘Save’ button
at the bottom of the screen to save the changes.
3.2.5.5.1.2 Static IP Assignment
The WQXM-PG Gateway has built in flexibility to use IPv4 as well
as IPv6 addresses. Contact the local IT or network administrators
for IP addresses available for each device. To assign the IP ad-
dresses to the devices, verify the DHCP checkbox is not selected
and enter in the IP address as specified into the IP address fields.
Verify that the correct subnet mask as well as default Gateway for
the assigned IP schema.
To assign a static IP address configure the following fields:
• IPv4 address or IPv6 address
• Subnet mask (for IPv4 addresses only)
• Gateway (for IPv4 addresses only)
3.2.5.5.1 Assigning an IP Address
Configuration changes on the Gateway are only available via the
portal’s wireless network after the ‘Enable Wi-Fi’ button has been
pushed. The IP address for the WQXM-PG wireless network is a
static 192.168.3.200 and cannot be changed. Once the IP address
has been updated, the ‘Enable Wi-Fi’ button can be depressed for
a second time to disable the Wi-Fi on the WQXM-PG. Additionally,