DORMA
ED400 In Floor
Controller Manual
22
DORMA AUTOMATICS, Inc.
924
Sherwood
Drive
Toll-Free:
877-367-6211
DL3128-010
Lake
Bluff,
IL
60044
Fax:
877-423-7999
10/1/2007
E-mail:
Subject to change without notice
SPECIFICATIONS
Main
features
•
Overhead Concealed Mount or surface mount (push or pull)
•
Center pivot or offset hinges
•
Complete: doesn't require a power-boost module, nor a brake box
•
Hand is field reversible
Control
inputs
•
Seven sensor inputs (individual LEDs indicate status):
o
Trigger (radar, motion detector, push plate, access control, RF receiver…)
o
Header (jamb) mounted presence sensor
o
Door mounted, approach side presence sensor
o
Door mounted, swing side presence sensor
o
Safety beam presence sensor
o
Fire (Smoke alarm)
o
Breakout switch
•
Input for Program switch (Off/Auto/Hold Open)
•
All inputs, except for the Fire and Breakout inputs, are active low, compatible with:
o
dry contact
o
open collector
o
TTL
o
any signal up to 24 Vdc
•
Fire and Breakout inputs are active open.
Control
outputs
•
Electric strike lock, open collector 100 mA max, 24 Vdc max.
not protected
. (requires additional relay,
not included; requires external supply, not included, for electric locks other than 24 Vdc)
•
Data (for dual zone sensors, such as BEA DK-12)
o
Door closed: open circuit (0 Vdc)
o
Door closing: 500 Hz square wave
o
Door opening or open: 12 Vdc unregulated, 100 mA source max
Control
inputs/outputs
•
Synch cable for side-by-side openers (part number DS2715-010)
o
RXD TXD.
Power
•
Input: 115 Vac, 2 A Max
•
Output: 24 Vdc, 0.8 A, unregulated, short circuit protected, for sensors and accessories
Safety
•
Operates as a passive door closer in case of power failure or controller failure
•
Smoke alarm and breakout switch input
Misc
•
Operating air temperature -40 to 50 °C
•
Small size: 8" wide x 4 " tall x 2.5" deep
•
Microprocessor controlled, FLASH re-programmable, replaceable
•
Two controllers may be synchronized for side-by-side doors
•
Closed loop control
