2.1.2 Holder FRJ large
The rotary joint is to be screwed into the Holder FRJ large (Fig.
). Ensure the stability of the rotary joint in the thread
to avoid slippage during use. The holder can be installed in a experimental setup using 1/4 (or M6) screws.
Figure 2.3:
Installation of the ERJ in the Holder FRJ large
2.1.3 GH FRJ
The
Gimbal Holder
allows swivel movement of the rotary joint along 2 axes. The rotary joint is to be threaded into the
holder (Fig.
). Ensure the stability of the rotary joint in the thread to avoid slippage during use. The holder can be
installed in a experimental setup using #8-32 screws.
Figure 2.4:
ERJ in the Gimbal Holder
Chapter 2. Operations Guide
8
