29
GE
n
Er
al
In
str
u
c
tIo
n
s
carE anD MaIntEnancE
Fitting the headrest cover
Extend the booster seat headrest to its highest position then
fit the headrest cover (pull on cover) by stretching it over the
headrest.
Fitting the main body cover
Starting at the shoulders, place the trim on and fasten the
velcro at the back . Next, on each side of the trim you will
see elastics, these elastics need to be threaded around the
armrest and attached. Last step, pull cover over base.
to remove insert
(If fitted)
To remove the insert,
separate the velcro 2 places.
Refer to illustration above.
Undo the buckle and pull the
insert out.
to replace insert
(If fitted)
Feed the crotch part of the
buckle through the opening
slot in the insert. Place the
shoulder straps as illustrated
and attach velcro 2 places.
Fasten buckle assembly.
VELCRO
the insert is to be used from 6
months to approximately 1 year)
