37
Connect and tighten
harness straps prior to
installing in vehicle.
Place child restraint flush
against the back of the
vehicle seat forward-
facing in the back seat.
The recline position is to
be used only to install the
child restraint flush against
the back of the vehicle seat
back, if needed.
With knee still in child
restraint, attach hook to
anchor in vehicle. Push
down firmly and tighten
top anchorage strap.
To adjust top anchorage
strap: See “Adjusting Top
Anchorage Strap”
section.
5
Place one knee in the
child restraint and push
down firmly while pulling
up on the loop to tighten
belt.
6
Forwar
d-Facing Use:
22-40 lbs.
(10.1-18 kg),
34-43” (85.1-110 cm),
Ov
er 1 y
ear of age
.
Forward-Facing Installation with
LATCH Belt: Install LATCH Belts
1
2
4
NOTE:
Do not use
LATCH system along with
the adult lap or
lap/shoulder belt.
Route LATCH belt
through upper slot in side
of shell.
Pull one LATCH hook
across the back and out
the other side.
The LATCH adjuster can
be on either side, but the
belt should not be twisted.
Fasten one LATCH belt
hook to the anchor in
the vehicle seat located
in the vehicle seat bight.
Repeat for other side of
child restraint. See your
vehicle owner’s manual
for locations and more
information.
continued on next page.
3
36
4358-3395E Touriva 5/15/06 9:42 AM Page 39
Page 20 of 26 Dorel Touriva / Comfort Ride / Regal Ride / Deluxe Conv (5/06)
