3305040
- 6 -
Reception of FM radio stations:
1. Pressing the button
[M]
turn on the radio mode).
2.
Automatic search for radio stations (scanning) and their recording in the memory
Press and hold the button
[ ]
of the device, the signal scanning and registration of radio
frequencies will begin and a short fragment of broadcast will be played. Release the button
[ ]
.
When tuning will be completed, broadcast of the first found radio station will be played.
3. By shortly pressing the button
[ /VOL+]
or
[ /VOL-]
, choose any of the fixed stations in
the memory.
4. Adjust volume.
PROVISIONS FOR PROPER USE
This is a complex device and it must be treated carefully. For device to serve for a long time and
trustworthy, please take into consideration the following:
1. Do not place the device in a very hot place (over 40˚C). In heat, electronic devices and
batteries damage faster and plastic details can even become deformed.
2. make sure the device is not in contact with water and any other liquids.
3. Do not draw the device near powerful sources of electric field and static electricity.
4. Do not arbitrarily open the device and repair it.
5. Do not insert non-standard, unqualified or broken spare parts, accessories, batteries in the
device.
6. If the device is brought from cold into a warm room, do not switch it on, but allow dewy details
to get dry for approximately two hours.
7. Do not allow unqualified persons to open the device.
8. Protect the device from blows, falls and powerful vibrations.
9. If the device has got wet, switch it off, wipe it and let it dry for at least 24 hours in a warm place.
CLEANING
Clean the device with soft, dry or slightly wet cloth, use no solvents (petrol, acetone, spirit etc.)
for cleaning.
Do not use any abrasive or caustic cleaning agents. After cleaning, carefully dry the device.
Technical data
Functions:
USB flash, microSD, linear input,
FM radio 87.5 - 108 MHz, Bluetooth
Speaker:
3" + 1"
Output power:
10W
Playback freq. range:
80 Hz - 20 kHz
Signal/noise ratio:
>60 dB
EN
