3305040
- 4 -
Charging adapter in USB output shall be 5V±10%. Charge the battery for 2-3 hours.
Note:
If the device is powered on at the time of charging, the time of charging is longer.
USAGE
Switching on:
To switch the device on, move over the switch
[ON-OFF]
to the position
ON
.
Volume adjustment:
Pressing the button
[ /VOL-] / [ /VOL+]
and holding for a while in pressed position you can
turn volume up or down.
Playback of MP3 files:
1. Put in USB or microSD slot memory card with MP3 records.
ATTENTION:
For normal performance of the memory card, make sure if the memory card
is put in before switching on the device with the switch
[ON-OFF]
. To do it the device has to
be switched off with the switch
[ON-OFF]
. If the memory card or USB device will be put in
or taken out of working device, information and/or equipment damage can occur!
If the memory card is not put in the jack accurately until it is fixed, data may not be read.
2. Turn on the device with the switch
[ON-OFF]
. The playback of MP3 record will start.
- If another mode has been used previously, by pressing the button
[M]
, choose MP3 mode
("music").
- By pressing the button
[ ]
you can turn on the pause mode - playback will be stopped.
- If you press the button
[ ]
once, recording will start to play from the paused moment.
- Next or previous recording selection:
By shortly pressing the button
[ /VOL+]
you can switch over to the next song.
By shortly pressing the button
[ /VOL-]
you can switch over to the previous song.
3. After listening to the records, press the button
[ ]
.
4. By switching the switch
[ON-OFF]
, power off the device.
5. Take out the memory card.
Playback of the analogue signal from external source:
1. Put in the cable plug in the 3.5 mm jack [
AUX IN
], put the other cable plug in the source (for
example, smartphone, tablet PC, MP3/MP4 player, etc.)
LINE OUT
or earphone jack.
2. Switch on the device and with the button
[M]
choose the mode "LINE".
3. Adjust volume.
Bluetooth wireless connection:
• Bluetooth is a technology that uses radio waves to wirelessly connect devices located
within a close range of each other.
• Since there are many different manufacturers, models and software versions, complete
functionality cannot be guaranteed.
EN
