Doosan P185WJD-D75, Руководство по эксплуатации и техническому обслуживанию

Страница: 35 / 64

OPERATION Operating & Maintenance Manual
Book: 46490694 (03-2010) Rev A 33
TOWING
DISCONNECT
• Engage tow vehicle parking brake.
• Chock tires of compressor.
• Set the vehicle parking brake. Chock wheels of unit.
• Standing to the side, remove pin from tube of jack.
• Disconnect safety chains. Crank jack to raise eye or coupler from hitch. Tow vehicle
can be moved.
UTILITY PACKAGE SET-UP (no running gear)
This unit must be located on vehicle bed to allow access for normal servicing and
maintenance. The air going into the inlet must be relatively free of oil, dirt, soot and other
debris. It must be no more than 10°F. (5°C) over the ambient temperature.
CONTROL PANEL
1. Discharge Air Pressure Gauge - Indicates pressure in receiver tank, normally from 0
psi (kPa) to the rated pressure of the machine.
2. Hourmeter - Indicates machine operating hours.
3. Main Ignition Switch - ON/OFF Start Switch.
4. Compressor Oil Temperature Gauge - Optional
5. Engine Oil Pressure Gauge - Optional
6. Engine Coolant Temperature Gauge - Optional
7. Battery Voltage Gauge
8. Engine Tachometer - Indicates engine speed in RPM from 0 when stopped to full
speed. (Optional)
9. Service Air Button - Push to engage. Allows user to load compressor after engine
warm-up.
10. Fuel Level Gauge - Optional