Doosan G06030001, Руководство по эксплуатации и техническому обслуживанию

Страница: 45 / 90

45 G60, G80, G100, G150, G200-SIIIA OM Manual
MAINTENANCE INTERVAL CHART
a
Clean air filter element when restriction indicator is red. Replace filter element after 6 cleanings or once a year.
b
For standby generator set only.
c
Change oil and filter after the first 100 hours of operation, then every 500 hours maximum thereafter. Change oil and
filter at least once a year.
d
Have your authorized dealer or engine distributor replace the vibration damper every 4500 hours/5 years.
e
Drain and flush cooling system every 3000 hours/3 years when John Deere COOL-GARD II coolant is used. Otherwise
every 2000 hours/2 years.
f
Contact your dealer when thermostat or injection nozzles are suspected to be defective. Replace injection nozzles
every 5000 hours and thermostat every 10000 hours.
Item 10 H /
Daily
Every 2
Weeks
500 H 1000 H /
1 Year
2000H /
2 Years 3000 H /
3 Years
4500 H As
Required
Check engine oil and coolant level •
Check air filter restriction indicator
a
•
Check fuel filter / water bowl •
Operate engine at rated speed and
50—70% load a minimum of 30
minutes
b
•
Change engine oil and filter
c
•
Replace fuel filter element(s)
•
Check crankcase vent system
•
Check engine mounts
•
Check engine ground connection
•
Check belt tension and automatic
tensioner
•
Check cooling system
•
Check air intake system
•
Replace crankcase vent filter
(optional)
•
Check crankshaft vibration damper
(6 cyl.)
d
•
Check and adjust engine speed
•
Drain and flus cooling system
e
• •
Adjust valve clearance
•
Replace crankshaft vibration
damper (6 cyl.)
•
Bleed the fuel system
•
Clean or replace air filter element
(see note a)
•
Replace fan/alternator belt
•
Test thermostat and injection
nozzles (see your dealer)
f
•