DoorHan Swing-2500, Инструкция по установке и эксплуатации

Страница: 7 / 12

7
InstallatIOn
Fasten rear bracket to the pole.
Rear bracket is fastened differently depending on the pole structure and material. When fastening to a brick pole it is necessary
to prepare the pole surface and install embedded concrete fittings. Mind that anchor bolts should be screwed between the bricks.
When fastening to a concrete pole use anchor bolts as shown in the picture below.
4.4. operator installation
Warning! Before installation make sure, that the gate moves freely and it is possible to install the operator on the pole
and the leaf securely.
Бетонный столб
Fasten front bracket to the gate wing.
Brick pole
concrete pole
pre-install
a steel bracket
When fastening rear and front brackets make sure they are fixed on the
same level.