DoorHan SHAFT-20, Инструкция по установке и эксплуатации

Страница: 8 / 12

8
ADJUSTMENT OF EXTREME POSITIONS
5.2. OPEN POSITION
• Make sure, that the operator is fixed rigidly, put the door in completely open position.
• Move a ring for extreme position installation (pos. 1) so that a screw (pos. 2) would press the lower microswitch
(pos. 3). See Figure 5.
• Close and open the door, make sure, that the screw presses the microswitch and DL2 indicator on the control
unit is off.
Figure 4
Figure 5
5. ADJUSTMENT OF EXTREME POSITIONS
5.1. CLOSED POSITION
• Make sure, that the operator is fixed rigidly; put the door in completely closed position.
• Move a ring for extreme position installation (pos. 1) so that a screw (pos. 2) would press the upper microswitch
(pos. 3). See Figure 4.
• Open and close the door, make sure, that the screw presses the microswitch and DL3 indicator on the control
unit is off.
1
2
3
1
3
2