DoorHan PCB-SW 24, Инструкция по программированию

Страница: 19 / 20

19
REMOTE CONTROL PROGRAMMING
NOTE.
ƒ
Perform remote control programming within operating range of the receiver.
ƒ
The number of each button can be determined by the dots on the remote control body.
4.4. REMOTE PROGRAMMING OF REMOTE CONTROLS
Items 1–4 shall be performed within 5-second interval:
1. Press and hold the button 2 of the programmed remote control.
2. Without releasing the pressed button 2 press and hold the button 1.
3. Release the pressed buttons.
4. Press the programmed button, the receiver will enter the remote control programming menu.
5. On the remote control press and release the button that you would like to program twice. A short signal will sound,
confirming successful recording, the display will show the number of recorded remote controls (01, for example).
1
1
1
1 2
2
2
2
4
4
3
3