Card and PIN Mode
To set users for relay 1. 4 1 1 #
To Add a card and Pin user
(The PIN is any four-six digits
between 0000 & 999999 with the
exception of 1234 which is
reserved.)
Add the card as for a card user
Press * to exit from the programming mode
Then allocate the card a PIN as follows:
* Read card 1234 # PIN # PIN #
To change a PIN in card and PIN
mode (Method 1)
Note that this is done outside
programming mode so the user
can undertake this themselves
* Read Card Old PIN # New PIN # New PIN #
To change a PIN in card and PIN
mode (Method 2)
Note that this is done outside
programming mode so the user
can undertake this themselves
* ID number # Old PIN # New PIN # New PIN #
To delete a Card and PIN user
just delete the card
3 Read Card # or 3 User ID #
To set users for relay 2. 4 2 1 #
The operation is the same as relay 1
To set Card user only. (in this mode, users can only be valid by card or fob)
To set Card user only
4 1 2 # Relay 1
4 2 2 # Relay 2
Entry is by Card/fob only
Relay Setting (Pulse mode, Toggle mode)
Pulse mode (Factory default)
Pulse mode - Door relay time
setting
For Relay 1: 5 1 1-99 #
For Relay 2: 5 2 1-99 #
The door relay time is between 1-99 seconds, the factory default setting
is 5 seconds. 1 means relay 1, 2 means relay 2
Toggle mode
Toggle mode
For Relay 1: 5 1 0 #
For Relay 2: 5 2 0 #
ACCESS
SECURITY
PRODUCTS
LTD
