INSTALLATION
Remove the back cover from the unit
Drill 2 holes(A,C) on the wall for the screws and one hole for the cable
Knock the supplied rubber bungs to the screw holes(A,C)
Fix the back cover firmly on the wall with 4 flat head screws
Thread the cable through the cable hole(B)
Attach the unit to the back cover
Wiring cable
Wire Insulation Colour
Function
Notes
Red
Power + (AC1)
12-24 Volts AC/DC Power input
Black
GND
Ground
Pink
AC2
12-24 Volts AC power input
Blue
NO
Normally open relay output
Purple
COM
Common connection for relay output
Orange
NC
Normally closed relay output
Yellow
OPEN
Request to exit input (REX)
Green
Data 0
Wiegand output Data 0
White
Data 1
Wiegand output Data 1
Grey
Alarm output
Negative output for alarm
Brown
Contact input
Door/gate input (Normally closed)