Reset Procedure
Reset Alarm:
The alarm will sound for 3 minutes. To reset, present a valid user card or enter
* (Master Code) #
via the
remote control
Reset to Factory Default:
To reset to factory default, power off, press the Exit Button or short circuit the Black (GND) and Yellow (Open)
wires, and then power on, there will be two bleeps, and the LED light will turn orange, keep this condition until
you hear a long bleep after 10 seconds. The LED will turn red to confirm factory default is successful
Reset to Factory Default to add new Mater Cards:
To reset to factory default, power off, press the Exit Button, or short circuit the Black (GND) and Yellow (Open)
wires, and then power on, there will be two bleeps, and the LED light will turn orange
Release the exit button or the Black (GND) and Yellow (Open) wires, then present any two 125KHz EM cards or
key fobs and the LED will turn red to confirm factory default is successful
The first card presented will be the
Master Add Card
, and the second card will be the
Master Delete Card
Note:
Reset to factory default, the user’s card/key fob information is still retained
