DoorBird D11 Series, Руководство по установке

Страница: 2 / 56

2
INSTALLATION MANUAL
Read these instructions carefully before starting to use
any components. Keep the manual so you can refer
to it at a later date if required. If you hand over the
device to other persons for use, please hand over the
operating manual as well.
You can always find the most up-to-date version of the
installation manual on www.doorbird.com/support
To make things easier we use the term “device” for
the product “IP Video Door Station D11x series” and
“mobile device” for a smartphone or tablet.
Liability
Every care has been taken in the preparation of this
document. Please inform Bird Home Automation
GmbH of any inaccuracies or omissions. Bird Home
Automation GmbH cannot be held responsible for any
technical or typographical errors and reserves the right
to make changes to the product and manuals without
prior notice. Bird Home Automation GmbH makes
no warranty of any kind with regard to the content
of this document, including, but not limited to, the
implied warranties of merchantability and fitness for
a particular purpose. Bird Home Automation GmbH
shall neither be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Equipment Modifications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no components that require service by the user.
Unauthorized equipment changes or modifications
will invalidate all applicable regulatory certifications
and approvals.
Symbols used
Danger: Indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
Warning: Indicates a hazardous situation
which, if not avoided, could result in death or
serious injury.
Caution: Indicates a hazardous situation
which, if not avoided, could result in minor or
moderate injury.
NOTICE
Notice: Indicates a situation which, if not
avoided, could result in damage to property.
Important: Indicates significant information
which is essential for the product to function
correctly.
Note: Indicates useful information which
helps in getting the most out of the product.
Hazard information
• Mounting, installation and servicing work on
electrical devices may only be performed by
a qualified eletrician. Failure to observe this
regulation could result in the risk of serious
damage to health or fatal injury due to electric
shocks.
• Devices with 110-240 V connection: The device
may only be connected to an easily accessible
power socket outlet. The mains adapter must
be pulled out if a hazard occurs.
• For power supply, only use the original plug-
in mains adapter delivered with the device or
a recommended PoE-Switch/PoE-Injector as
specified in this manual.
• Because of electrostatic charging, direct
contact with the circuit board can result in
destruction of the device. Direct contact with
the circuit board must therefore be avoided
at any time.
• Observe the EN 60065 resp. EN 60950 resp.
EN 62368 standard.
• Do not use the device if there are signs of
damage to the housing, control elements
or connecting sockets, for example, or if it
demonstrates a malfunction. If you have any
doubts, please have the device checked by
an authorized expert.
• Do not open the device. This voids the
warranty of the device. The device does not
contain any parts that can be maintained by
the user. In the event of an error, please have
the device checked by an authorized expert.
• For safety, approval and licensing reasons (CE/
FCC/IC etc.), unauthorized change and/or
modification of the device is not permitted.
• The device is not a toy; do not allow children
to play with it. Do not leave packaging material
lying around. Plastic films/bags, pieces of
polystyrene, etc. can be dangerous in the
hands of a child.
• Always lay cables in such a way that they do
not become a risk to people and domestic
animals.
• Voltage is applied to parts within the
equipment. Do not touch any parts that are
not associated with the installation, wiring, or
connection. Electric shock could result.
• On devices which are not marked as weather-
proof: Keep the device away from water or
any other liquid.
• Do not install or make any wire terminations
while power supply is plugged in. It can cause
eletric shock or damage to the device.
• Before turning on power, make sure wires are
not crossed or shorted. If not, fire or eletric
WARNING