Dongfeng Sokon; C Series, Руководство по ремонту и обслуживанию

Страница: 5 / 94

using car will affect much on its using length of life, its working fiduciary level and economical efficiency.
Therefore, the new car must strictly execute the rules when used.
(1)The rules of breakingin when driving less than 1000km
1) Driving at full speed is absolutely not allowed
2) Drive generally less than 100km/h
3) Avoid driving at high speed in each gear.
(2) The rules of breakingin when driving between 1000km-15000km: gradually drive to the highest speed or
the highest rotation rate which engine allows.
(3) Notices after the period of breakingin.
1) Drive the car with speed indicator. When you get into the accessing high speed gear, no later than the
finger reaches the red indicating area, the highest rotation speed is 5500r/min which engine allows in the short
time. The highest speed which each gear allows is respectively: 20km/h in 1 gear, 30km/h in 2 gear, 50km/h in 3
gear, 70km/h in 4 gear, 80km/h in 5 gear.
2) Avoid engine rotating with unnecessary high speed, and early getting into high speed gear is
favorable to save fuel and reduce noise.
3) When we are driving, the rotation rate can not be too low. Only if engine works hard can low gear be
used.
4) The speed and rotation rate listed in the explanation book is only applicable to engines with normal
temperature. When cooling the car, we should not make engine work with high rotation in neutral position or in
each gear.
5) The new tyre doesn’t have the strongest adhesion at the beginning of use, so it also needs breakingin.
Driving the first 100km should be slow and careful.
6) The new friction wafer of brake also needs breakingin. When we drive the first 200km, there is no
appropriate friction. If the braking works not well during this period, we can properly add pressure on the pedal.
2.2 Driving
Proper driving not only shows the good technical performances of the car, but also ensures safety driving.
Therefore, as a driver, we must do the daily maintenance work before driving, and during driving, we should drive
the car properly according to different roads.
2.2.1
．
Checking preparation before driving
(1) Check the fuel gauge and judge whether it needs to add fuel.
(2) Check the lube level and examine whether the track on the vemier is between upper limit and lower limit.
If the fuel is not enough, we should add fuel on time; when the fuel is excessive, on most occasions, lubricating
system of engine will be in trouble. Therefore, we should analyze the reasons immediately and solve the troubles.
(3) Check the cooling liquid level to see whether it accords with requirements. If it is not enough, we should
add cooling liquid on time.
(4) Check the braking liquid level to see whether it accords with requirements. If it is not enough, we should
add braking liquid on time.
(5) Check the electrolyte level of battery to see whether it accords with requirements. If it is not enough, we
should add distilled water on time.
(6) Check the tyre’s inflating pressure to see whether it accords with requirements and whether there are
enough spare tyres.
(7) Check whether the lamplight, steering signal lamp and braking signal lamp are in good condition.
(8) Check whether the front and back air window are clean, the angle of back mirror inside and outside of the
car is proper, and whether wiper is in normal work.
(9) Whether the steering wheel height is adjusted to a proper position, and whether the seat and safe belt are
adjusted to a proper position.