Donati CBE Series, Инструкция по использованию

Страница: 48 / 80

INSTALLATION, USE AND MAINTENANCE
GBA-GBP-CBE-MBE SERIES
44
Assemble of trolley/hoist on the profile S channel arm crane:
See “instructions for use”, of the trolley/hoist, included in this publication
1. Extract the channel trolley and the related hoist from any packing
2. Remove the block clips 1 (Instructions in fig. 71) and remove the suspension pins 2
3. Insert the eyebolt (or the suspension hook) of the hoist in the trolley plate 3 or in the brake beam 4 ,
respectively, when using a simple or double trolley.
4. Reassemble the suspension pins 2 and block the with the clips 1 .
5. Position the hoist/trolley unit on a pallet and lift this until the leading height of the head of the channel
section is reached.
6. Working at a height, insert the preassembled lifting unit in the channel section and put the closing
cover 5 in place, then tighten the fixing components 6 .
fig. 71
fig. 72
fig. 73
Electrical connections of the lifting unit (trolley/hoist):
To connect the festooned cable of the power line to the terminals of the electrical
apparatus of the lifting unit, see “Instructions for use”, of the trolley/hoist, included in
this publication.
•
Never carry out electrical connections with live power
•
Never make precarious connections or flying connections
•
Clamp down completely the cable presses
•
Procure the electrical circuit diagrams for the hoist/trolley on which you are
working