17
ASSEMBLY INSTRUCTIONS
E
N
G
L
I
S
H
Assembly, stage 2:
Fig. 1 :
1. Remove screw J and washer Q from the right handle
support E.
2. Connect cables I and K.
DO NOT FORCE CORRECT CABLE POSITIONING.
CAREFULLY INSERT THE EXCESS CABLE INTO THE FRAME.
3. Fix the right handle support E to the chassis and tighten
screw J and washer Q.
Fig. 2 :
1. Remove screw J and washer Q from the left handle
support D.
2. Fix the left handle support D to the chassis and tighten
screw J and washer Q.
Fig. 3 :
1. Connect cables K1 and L1.
2. Fix the handlebar G to the handle supports.
3. Tighten the 2 screws P, AT THIS STAGE, DO NOT
TIGHTEN COMPLETELY.
Fig. 4 :
1. Position the 2 screws P for fixing the handlebar G
on the left handle support D.
TIGHTEN ALL SCREWS COMPLETELY.
2. Fit the screw covers to the handlebar.
Fig. 5 :
1. Connect the cable L to the cable inside the console.
2. Position the console O to the handlebar.
3. Successively tighten the 4 screws R.
Fig. 6 :
1. Unfold the tread so it is vertical.
2. Push the position ball screw into the raising tube.
1
2
3
4
5
6
Horizontal assembly:
You can adjust the 2 screws underneath the chassis to ensure
the machine’s stability on the ground.
1. Lift the machine on one side and turn the screw under-
neath the chassis.
2. To tighten the screw, turn clockwise and anti-clockwise.
Each time the machine is moved, check stability and adjust
as necessary.
E
J
K
Q
I
D
Q
J
H
P
G
N
L1
Q
K1
H
G
P
L
F
D
N Q
O
G
R
L
M
Unscrew
Screw