15
Factory set defaults:
Hysteresis ON: 0.4 ºC
Hysteresis OFF: 0.4 ºC
Frost protection temperature: 5 ºC
Temperature calibration:
MyDomo may indicate a temperature different from the real
one due to its location in the house. After choosing the place of functioning thermostat,
it is useful to calibrate it. Use a precision thermometer near the thermostat that you
keep a minimum of 50 minutes. Press and hold SET and MODE until the temperature
remains on the display only. Enter the thermometer indicated value standard by turning
the wheel on the side of thermostat and press the SET.
Warning:
the thermostat does not show correct temperature value and does not allow
calibration in less than 50 minutes after the electrical supply! The temperature is correct
and the device can be calibrated only after the symbol "C grade" goes from small
º
c
to big
º
C
