13
5. MYDOMO WI-FI REMOTE CONTROL (TRANSMITTER)
If Wi-Fi connection or the internet is not available, thermostat still work
per previous settings before network cut off, or you can set by
pressing the buttons on MyDomo.
All LED light up for 3 seconds upon powering on, followed by version of built-in
hardware.
①
MODE: Press to select “MANUAL MODE”, “PROGRAM MODE” or “OFF
MODE”.
②
SET: Press SET to change between room temperature and hour. Press 5
seconds to connect Wi-Fi.
③
Knob: Rotate to adjust temperature (valid only in “MANUAL MODE”).
④
Room temperature sensor.
⑤
RESET: Reboot screen appears after reset button pressed.
⑥
&
⑦
Micro USB port: to supply power.
1
2
3
6
5
4
7
